Miura ICL Utility Iron

The ICL-601 Driving Iron (Inner Cavity Long Iron) is part of Miura’s MG Collection. Combining SUS casting with a premium 455 carpenter steel face this iron blends seamlessly with any set of Miura irons.

Miura ICL Utility Iron

The inner cavity design is not new to Miura. Is was first used with their hugely popular IC 2003. (IC 6001 in Japan). Modern technological advances have allowed the Miura’s to improve on the original while optimizing ball speed and performance. This is accomplished by integrating a face of 455 Carpenter Steel (as found in our PP 9005 G) and use of the Hayate variable weighting system which allows for customization by your Miura dealer. With the standard 8g weight included, the 244g weight of the 23° ICL Utility Iron head is exactly the same weight as a standard 4iron. This allows for the club to be assembled with the same shaft in the rest of your set or to be fit with the optimum performing shaft regardless of the weight of the shaft. The inner cavity of the head allows for a wider sole and ability to enhance the low center of gravity. The way the club head sits at address, due in large part to the shape of the sole, will give the golfer confidence not usually found when hitting a long iron. Like other forged irons, the lie and loft angles can be adjusted which enables the ICL to seamlessly fit in to any set of Miura irons. Of course, we recommend these adjustments be done by an Authorized Miura Dealer


*18° and 20° are out of stock*

Additional information

Weight 13 lbs
Dimensions 40 × 6 × 6 in

2I 3I 4I


18º 20º 23º

Lie Angle

59º 59.5º 60º

Head Weight

18º 232, 20º 238, 23º 244